Poor quality wiper blades

[PrudentOcean]

The Bosch Icon 26” and 22” (OEM size) wiper blades are available as a set.

https://www.amazon.com/BOSCH-26OE22OE-ICON-Wiper-Blades/dp/B07VBPKQS6/ref=mp_s_a_1_1_sspa

Sponsored

 

[macanchan]

I noticed mine was leaving streaks between the area both wipers pass. No noticeable jutter or skip. Ill try to clean the blades next time and test it again.

 

[Tblue87]

The Bosch Icon 26” and 22” (OEM size) wiper blades are available as a set.

https://www.amazon.com/BOSCH-26OE22OE-ICON-Wiper-Blades/dp/B07VBPKQS6/ref=mp_s_a_1_1_sspa

Wondering if you have tried these 26/22 size? My originals are streaking bad, but I measure 26/21 on my Macan 4. Worried the 22 passenger side would rub against the windshield frame? Thanks

 

[PrudentOcean]

I have not, I haven't had the need to replace my wipers yet.. I only posted that link because PaulR referenced part numbers that were not direct replacements.

The replacement part numbers for the Bosc Icon are 24OE and 20OE. The blade lengths are 24" and 20". OEM blade lengths are 26" and 22". They will leave a small unwiped section in the lower middle of the windscreen, and 1" less wipe top and bottom of the windscreen. Other than that they worked very well. Use adapter 4 for install.

 

[Tblue87]

Thanks. I'll try them and report back.

 

[Doggo]

Thanks. I'll try them and report back.

I went with RainX 26 and 22, all fits same as stock. Happy with the improvements.

 

[Tblue87]

I went with RainX 26 and 22, all fits same as stock. Happy with the improvements.

I just installed Bosch Icon 26OE and 21OE, fits perfect (use the number 4 adapter). My stock blade on passenger side (on a Macan 4) was measured actual 21 inch.

 

[Sirium]

I had a ceramic coating applied to the windshield as soon as I got the car and didn't get a chance to see the wipers in action before coating.

Do you guys think that's what's causing them to judder?

someone already replied but same, always told my detailer to skip the window coating.

Sponsored